Perancangan Meja Workshop Kayu untuk Pembelajaran Studio Praktik Bengkel Mahasiswa dengan Pendekatan Ergonomi
Keywords:
Perancangan meja workshop kayu, Ergonomi, EfisiensiAbstract
Dalam perkuliahan praktik mahasiswa desain produk industri diharapkan dapat mencapai tujuan pembelajaran yang telah ditentukan, yang mana efisiensi dalam prosedur praktik menjadi sebuah penilaian penting. Mahasiswa mempelajari praktik pembuatan produk berbasis kayu masih dalam tingkatan pemula, sehingga kualitas peralatan penunjang di dalam laboratorium workshop harus lebih diperhatikan. Meja workshop menjadi salah satu upaya untuk meningkatkan efisiensi mahasiswa dalam memproduksi sebuah produk khususnya dengan menggunakan material kayu sebagai tahap awal pembelajaran. Meja workshop harus dirancang dengan mengoptimalkan pergerakan serta sirkulasi kerja dengan tujuan meningkatkan efisiensi pekerjaan. Perancangan meja workshop workshop kayu ini menggunakan metode Human Centered Design dengan pendekatan ergonomi yang menekankan pada fitur fungsi pada meja, dimensi ukuran meja serta daya jangkau pengguna. Dalam tahap perancangan akan dilakukan pengukuran secara antropometri terhadap pengguna yang dilakukan kepada mahasiswa. Perancangan meja workshop kayu ini bertujuan untuk meningkatkan efisiensi mahasiswa desain produk industri dalam membuat produk berbasis material kayu. Hasil perancangan yang didapatkan akan diuji coba dalam proses pembelajaran praktik workshop oleh mahasiswa desain produk industri untuk meningkatkan efisiensi dalam membuat produk berbasis kayu.
References
Bob Vila. (2023). The best portable workbenches tested in 2023. BobVila.com. https://www.bobvila.com/articles/best-portable-workbench/
BostonTec. (2020). Ergonomic Reach Zones in Workbench Design. Retrieved from https://bostontec.com/literature/Bostontec-Ergonomic-Reach-Zones.pdf
Bridger, R. S. (2017). Introduction to human factors and ergonomics (4th ed.). CRC Press.
Brown, T. (2009). Change by design: How design thinking creates new alternatives for business and society. Harvard Business Press.
Dam, R. F., & Siang, T. Y. (2020). What is ideation in design thinking?. Interaction Design Foundation. https://www.interaction-design.org/literature/article/stage-3-in-the-design-thinking-process-ideate
Erdinc, O., & Yeow, P. H. P. (2011). Workstation redesign for a repetitive drill press operation: A combined work design and ergonomics approach. International Journal of Industrial Ergonomics, 41(6), 659–671. https://doi.org/10.1016/j.ergon.2011.08.001
FlexiSpot. (2022). What Are the Three Ergonomic Working Zones and Why Should You Use Them? Retrieved from https://www.flexispot.com/spine-care-center/what-are-the-three-ergonomic-working-zones-and-why-should-you-use-them
Hocking, D. (2023). The brief in the art and design education: a multi-perspectival and mixed-methodological study. Macquarie University, Faculty of Human Science.
IDEO.org. (2015). The Field Guide to Human-Centered Design. IDEO.org. https://www.designkit.org/resources/1
IQS Directory. (2024). Portable workbenches. https://www.iqsdirectory.com/articles/work-bench/portable-workbenches.html
Kroemer, K. H. E., & Grandjean, E. (2021). Fitting the task to the human: A textbook of occupational ergonomics (6th ed.). CRC Press.
Kusumadewi, I., Pangestu, D. A., & Ulfiati, A. N. (2022). Ergonomic Work Facility Design Using Anthropometric Data. Journal of Mechanical and Manufacture.
Lim, Y. K., Stolterman, E., & Tenenberg, J. (2008). The anatomy of prototypes: Prototypes as filters, manifestations and hypotheses. ACM Transactions on Computer-Human Interaction (TOCHI), 15(2), 1–27. https://doi.org/10.1145/1375761.1375762
Mahoney, M., Kurczewski, A., & Froede, E. (2014). Multi-user ergonomic workspace design using Monte Carlo simulation and anthropometric data. In Proceedings of the Human Factors and Ergonomics Society Annual Meeting, 58(1), 1111–1115. https://doi.org/10.1177/1541931214581230
Nayyar, A., Rani, S., & Saini, H. (2023). Advanced composite materials: Applications in engineering and manufacturing. Springer Nature.
Panero, J., & Zelnik, M. (2014). Human dimension and interior space: A source book of design reference standards (eBook ed.). Clarkson Potter/Ten Speed Press.
Panggabean, M. K. N., Isabed, A., Hung, J. J., Saputra, Y. B. R., & Setiawan, H. (2023). Perancangan meja assembly dengan pendekatan antropometri pada bengkel kayu "X". JIeTri: Journal of Industrial Engineering Tridinanti, 2(1), 1–10. https://doi.org/10.52333/jietri.v2i01.654
Pheasant, S., & Haslegrave, C. M. (2018). Bodyspace: Anthropometry, ergonomics and the design of work (3rd ed.). CRC Press.
Pheasant, S., & Haslegrave, C. M. (2018). Bodyspace: Anthropometry, ergonomics and the design of work (3rd ed.). CRC Press.
Reddit. (2023). Beginner woodworking discussion: Best workbench for small space? https://www.reddit.com/r/BeginnerWoodWorking/comments/139syz0/
Richter, P., Mihalic, R., & Fröhlich, J. (2022). Ergonomics in modern workshop environments: Optimizing furniture design for safety and performance. Applied Ergonomics, 103, 103834. https://doi.org/10.1016/j.apergo.2022.103834
Sanders, E. B.-N., & Stappers, P. J. (2014). Probes, toolkits and prototypes: Three approaches to making in codesigning. CoDesign, 10(1), 5–14. https://doi.org/10.1080/15710882.2014.888183
Schwarz, C. (2017). The practical workshop: A woodworker’s guide to workbenches, layout & tools. Popular Woodworking Books.
Singh, A. K., Jain, R., Singh, B., & Meena, M. L. (2021). Ergonomic evaluation and work table design for wood furniture manufacturing industry. In R. D. Yadav, S. C. Sharma, & N. Sharma (Eds.), Ergonomics for improved productivity (pp. 383–390). Springer. https://doi.org/10.1007/978-981-15-9054-2_43
Sudiajeng, L., Adiputra, N., & Sutjana, D. P. (2012). Ergonomics work stations decreases the health impairment and saves electrical energy at the woodworking workshop in Bali, Indonesia. Journal of Human Ergology, 41(1–2), 41–54. https://doi.org/10.11183/jhe.41.41
Tarmizi, N. H., Ahmad, M. S., & Ariffin, A. K. (2021). Ergonomic design evaluation of modular workbenches using digital human modelling. International Research Journal of Engineering and Technology (IRJET), 8(1), 1129–1134. https://www.irjet.net/archives/V8/i1/IRJET-V8I1129.pdf
The Spruce. (2024). The 9 best workbenches of 2024. https://www.thespruce.com/best-workbenches-4584455
Ulrich, K. T., & Eppinger, S. D. (2020). Product design and development (7th ed.). McGraw-Hill Education.
Vitrue Health. (2023). Ergonomic Work Zones. Retrieved from https://www.vitruehealth.com/blog/ergonomic-work-zones
Wang, Y., Zhang, L., & Shen, W. (2023). A framework for rapid prototyping in design education using digital fabrication tools. International Journal of Technology and Design Education, 33(1), 211–229.
Wikström, A. (2023). Storyboarding: Framing and reframing the design brief. In Demystifying innovation and design–the importance of visualization in ideation and conceptual design. Springer.
Zhang, X., Li, P., & Chen, R. (2023). Ergonomic optimization of workshop furniture for vocational training environments. International Journal of Industrial Ergonomics, 93, 103418. https://doi.org/10.1016/j.ergon.2022.103418
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 SERENADE : Seminar on Research and Innovation of Art and Design
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
